FULLY ENCLOSED PLATFORM LIFTS

The Liftech Platform Lift is British built and complies to buildings regulations 2000 part M, ISO 9386-1 and is CE marked.

Using the ultra-reliable and low maintenance self-sustained nut and screw drive, the lift can have up to 6 stops and travel up to a maximum lifting height of 10 metres.

A wide range of colours and enclosure options, including half height gate, partially or fully glazed, and external package are available.

With lighting and emergency-lowering both battery backed, the lift provides a worry free solution to your access requirements.

Additional Options:

Visual annunciation. Power operated doors. Glazing panels (clear, etched or tinted). Key operated door call points. Key isolation. Extended top enclosure height. Special RAL colours. Induction loop. Intercom. Drop down seat. External package available.

Colours:

The standard main frame structure is white - RAL 9003 or bespoke special RAL colour to your choice as an optional extra.

Flooring:

Quartz crystal, aluminium oxide and silicon carbide particles incorporated throughout the full thickness of the vinyl to improve traction and safety underfoot. Conforms to EN13845.

Doors:

There are two door options available, the Standard door and the Fire door.

Specifications:

Model: Platform Lift
Height: Up to 10m travel
No. of stops: Up to 6
Rated load: 400kg s.w.l.
Platform size (mm) External footprint (mm)
1480 x 1100 1600 x 1500
  (Part m building regulations)
1480 x 1000 1600 x 1400
1480 x 900 1600 x 1300
1480 x 1000 1600 x 1400
1480 x 900 1600 x 1300
Voice annunciation on platform
Pit depth: 50mm (or 50mm ramp)
Power: 240v 20a or 3 phase 415v 10a Self sustained nut & screw.
Lifting mechanism: Soft start / stop & Automatic lubrication
Powered emergency: Lowering as standard
All on-board mechanics (no additional motor box)

1M RISE VERTICAL PLATFORM LIFT

This lift has been specifically designed to overcome wheelchair access problems to a public building, where ramping is not feasible; due to the length required to achieve the recommended gradient.

This model operates up to one metre, (see also a two metre design)

Suited to either outdoor or indoor applications, the design incorporates an integral ramp to eliminate the need for a pit, thus keeping building work to a minimum. Pit option available for internal use if required.

The standard finish is maintenance free stainless steel but other materials or paint finishes are available to suit the surrounding decor.

Upper level gate option is required if the lifting height exceeds 260mm.

A major feature of the design is the lack of mast or support tower, minimising aesthetic intrusion into the environment.

In the event of a mains power failure the lift features an emergency lowering facility.

Safe working load 250kg (39 stones).

Designed to BS 6440 and CE compliance.

2M RISE VERTICAL PLATFORM LIFT

This lift has been specifically designed to overcome wheelchair access problems to a public building, where ramping is not feasible; due to the length required to achieve the recommended gradient.

This model operates up to two metres.

Suited to either outdoor or indoor applications, the design incorporates an integral ramp to elimiate the need for a pit, thus keeping building work to a minimum. Pit option available for internal use if required.

The standard finish is maintenance free stainless steel but other materials or paint finishes are available to suit the surrounding decor.

A major feature of the design is the lack of mast or support tower, minimising aesthetic intrusion into the environment.

Full platform safe edge which stops the lift should it touch any obstacle in the down direction only. Protects against entrapment below the platform and inside the guid. Fully interlocked upper and lower gates.

In the event of a mains power failure the lift features an emergency lowering facility.

Safe working load 500kg (78 stones).

Designed to BS6440 and CE compliance.

INCLINED WHEELCHAIR STAIR LIFT

For Wheelchair users and less mobile persons, internal or external appplications.

The wheelchair stairlift is designed for straight staircases and can be fitted to a wall or supported on stanchion posts.

The stairlift is convenient and easy for the user to operate independantly, because the barrier arms and ramps are powered.

When the stairlift is not in use, it can be folded and parked with a depth of only 285mm from the wall, so it will not block up the staircase.

The lift is reliable and complies with British and European safety standards. Safety features ensure that it is impossible to operate the lift until the barrier arms and ramps are folded and in place. The lifts stops automatically at the upper and lower landings.

The user can stop the lift at any time, the lift stops automatically if it meets an onstruction on the staircase. The barrier arms and ramps are pressure sensitive and the platform is fitted with a pressure sensitive undertray. If the power to the lift fails, the lift can be operated using the manual hand-wind handle.

Safety features:

  • Rack and pinion drive.
  • Overspeed governor.
  • Manual hand-wind.
  • Manual release of barrier arms and platform.
  • Emergency stop buttons.
  • Key-switched controls.
  • Electrical components to IP65.
  • Pressure sensitive ramps and undertray.

Technical data:

  • Satin finish anodised aluminium rail with 80mm x 160mm profile.
  • 225kg safe working load.
  • 20-50 degree stair angle.
  • Speed 0.10 m/sec.
  • Drive motor 400 watts.
  • Soft start.
  • Built to the following standards: CE, BS, TüV, SA, ISO9386-2.

PORTABLE WHEELCHAIR LIFTS

With added safety features and an anti-roll device, these are ideal alternatives to ramps for wheelchair user. With their compact design, foldable platforms and hinging option, they can be fitted where other lifts cannot.

Up to 1000mm travel height. Emergency manual operation. Rising column handles give added support and security. Anti-slip platforms, anti-trap switches under platform. Optional safety steady bar or handrails for added safety (recommended for heights over 300mm).